ZenithOwner.com Forum LinkZenithOwner.com Home ButtonZenithOwner.com Builder's ListZentihOwner.com DownloadsZenithOwner.com Contact
Zenith Cruzer I finished up the bottom by match drilling the holes from this rear plate into the longerons and bottom skin.
Zenith Cruzer Then this larger bulkhead was riveted to the bottom. The bottom is now 100% complete and set aside for later.
Zenith Cruzer The first step to the top skin is to cleco the two aft bulkheads to the top longerons.
Zenith Cruzer I guess I got busy drilling and didn't take pics, but all the holes from the top skin are match drilled into the longerons.

On the front, there are two plates that get added to the top on the L and R side.

Zenith Cruzer Here are both plates. Also completed today are all the L angles cut and drilled. They are drilled to #40 and still need to be drilled to #30.