ZenithOwner.com Forum LinkZenithOwner.com Home ButtonZenithOwner.com Builder's ListZentihOwner.com DownloadsZenithOwner.com Contact
Zenith Cruzer First task today was to drill the holes for the nutplates on the bottom inboard skin access hole. I countersunk them and riveted the nutplates.
Zenith Cruzer I riveted the spar extension to the spar.
Zenith Cruzer Here's the back showing the pulled rivets.
Zenith Cruzer Here the outboard L is riveted to the extension.
Zenith Cruzer I also bolted on the upper strut attachment.

UPDATE: Do not install this piece now! You can see in the pic below that there is a nose rib right above the strut attach bracket. With the bracket attached now, access to about 3-4 holes in the skin is blocked and you won't be able to rivet the skin to the rib. I've removed the fitting and will install it after the nose skin is riveted.

Zenith Cruzer Looks good!

Remember-don't install this yet!!