ZenithOwner.com
ZenithOwner.com Forum LinkZenithOwner.com Home ButtonZenithOwner.com Builder's ListZentihOwner.com DownloadsZenithOwner.com Contact
LEARN | BUILD | FLY
Zenith Cruzer Here's what I'm working on for the fuel system. Everything right now is just finger tight, but I'm planning the fuel line routing.
   
Zenith Cruzer The line comes out of the tank and makes a 90 degree bend and exits through the grommet.
   
Zenith Cruzer Then it makes another 90 degree turn towards the fuselage where I will have a bulkhead fitting.
   
Zenith Cruzer You might wonder why the lines are too short, right?

From the line to the fuselage I'll use a flexible steel line from AircraftSpecialty.com.

That way I have some wiggle room since the lines are flexible.

On the bottom of the trailing edge piece, I'll cut open an access panel so that I can inspect or have future access to the fittings incase they decide to leak or something.

   

Home