ZenithOwner.com Forum LinkZenithOwner.com Home ButtonZenithOwner.com Builder's ListZentihOwner.com DownloadsZenithOwner.com Contact
Zenith Cruzer Dad and I made these clips and match drilled them. The plans call for the clip to be 50mm. You will find that 50 mm is too large and the clip won't fit nicely. I had to trim it down and then bevel the edges to match the rib.

The manual doesn't mention any of this so take your time and pay attention!

Zenith Cruzer

The original per the plans is on the right. The one on the left is the one that actually fits!

Zenith Cruzer Dad is clecoing the elevator hinge as we match drill the holes.
Zenith Cruzer Hinge is all drilled.
Zenith Cruzer