This is the butterfly valve for the
passenger side cabin heat.
I'll label them later, but here are the two
push/pull knobs for pilot and passenger
I used two clamps to hold the cable to the L
angle on the firewall.
I was thinking about how I wanted to connect
the wire to the arm. I thought I would go to
a hobby store and use a ball joint or
something from an R/C plane. Then I thought
about how I have a tendency to make things
way more complicated than they need to be.
So, I just did what the factory did-I
drilled a hole in the arm and just bent the
wire in the hole. Works perfect.
Here's a view of the routing of the cable
and the two clamps used to secure it to the
L angle on the firewall.