ZenithOwner.com
ZenithOwner.com Forum LinkZenithOwner.com Home ButtonZenithOwner.com Builder's ListZentihOwner.com DownloadsZenithOwner.com Contact

LEARN | BUILD | FLY


 

Zenith Cruzer Here is the stiffener plate I made for the comm antenna that mounts on top of the fuselage. It's about an 8-9 inch square with a corner bent 90 degrees. After I bent the corner, I cut off the extra.
   
Zenith Cruzer This is the underside of the top skin.
   
Zenith Cruzer Plate drilled to skin and angle.
   
Zenith Cruzer Stiff as hell.
   

Home